Echo Dot Gen 3 Holder - T3-M4 Droid

thingiverse

This one is a little out there, this is a T3-M4 droid echo dot gen 3 holder, I deconstructed the original, and made it a piece by piece build, I smoothed out the indent circles in all the joints, I have included a pinning system for all the connections to make the print as easy as possible, thus body pins run straight through and create the connections (see warning below) thus the right diameter for the pins can make this a *mostly* glueless build, the head/holder requires glue or flat head 3mm bolts. This will require some minor supports, shouldn't be terrible, but due to the original design I didn't want to take the nice design elements out of this. !! WARNING !! The pins The pin tolerances may need tweaking, do a test pin to see how it fits in the holes, and adjust the X,Y accordingly for ALL pins if adjustment is needed, by my guess it may just need a slight decrease by a percent or so. all the pin holes are the same diameter but this can be affected by how your printed handles it's tolerances. The head The head and body has 2 alignment holes to aid in gluing it together, you *could* use flat head bolts without it affecting the echo's seating ability. May-22-2021 - I have redesigned the head to v3 to fix a possible sizing issue, the internal space to hold the echo is now 100mm (the echo gen 3 is 99mm so this should fit better now) Any issues let me know and I will try to address them but this should print pretty well. Enjoy!