Efficient Bed Level Test (300X300)
thingiverse
Most of the time when I end up testing my bed level there is a problem where CURA adds some Z height (I was using CHEP's leveling test which I believe to be accurate but CURA messes with it.) So while looking for STL files around for leveling my print I kept finding tests that either A: Took too much filament, and therefore B: Took too long. This print takes very little time and very little filament. It will give you an idea of how close you are to the bed just by watching the nozzle squish the filament against the bed. The grid is sized at 250X250 but is ideal for a 300X300 printer, I printed this on the CR10 V3, cant really advertise its printability, its extremely easy to print. ----------------------------------------------------------------------------------------------------------- This grid is sized at 0.5mm width 0.2mm height, please use a 0.4mm nozzle with 0.2mm layer height, as is standard on most Creality machines. ----------------------------------------------------------------------------------------------------------- Make sure you slice the STL file in the slicer of your choice with the settings you plan on using, otherwise you might encounter the problems I have been having.
With this file you will be able to print Efficient Bed Level Test (300X300) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Efficient Bed Level Test (300X300).