Egg Plane DC-10 or MD-11

thingiverse

The egg came first on this one! Then I added everything else. For the DC10 print the DC10 wing and for the MD11 print the MD11 wing. Each wing file also contains the inlet for the number 2 engine on the tail. Here's some printing tips: Best to print parts separately. The scale is pretty small on this plane. You could scale it up but that might affect the fit of the parts. - Fuselage has 2 versions, one with recessed cockpit windows and one without windows. Someone might want to make decal windows. Best printed vertically with support. 20% infill. - Wing files also contain the engine pylons and inlet for the tail (#2) engine since it's different between the two planes. The MD11 wing has the winglets and should be printed with support. Use caution removing the support so as not to damage the small winglet. - Engines Can be printed without support but might want to add a brim for bed adhesion. - Landing gear and tires should be printed with a brim for bed adhesion. They are small and I couldn't get them to stay in place during printing until I added a brim. - Stabilizer and Tail I printed as is without trouble. - Stand is printed at 100% infill and no support. For assembly the engine parts are glued together and to the wing. The tires fit on the square axles. The other parts may need a drop of glue for security. **Update** 3/25/22- Updated fuselage files to add a hole in belly for stand and better recesses for cockpit windows. Also added file for stand.