Ejection Canister for Rocketry
thingiverse
Used on many of my rockets. Currently 1g, 2g, 3g, 4g, 6g, 8g, and 12 g tube. Sizes are calibrated assuming 1g of FFFFg = approximately 1 cc. The bottom takes a #4 or M3 screw to hold it to the bulk plate. The hole at 45 degrees is for the wire to exit. Printed with 40% infill for strength. So far these have withstood up to 8 uses. Will add any sizes you request. You are using black powder - use at your own risk. Print Settings Printer brand: Prusa Printer: Mk3s Rafts: No Supports: No Resolution: .2mm Infill: 40% Filament brand: Overture Filament material: PLA+ https://www.amazon.com/Overture-Filament-Toughness-Enhanced-Dimensional/dp/B07YDN56F2?th=1&linkCode=sl1&tag=3dprintblog-20&linkId=e04226edb8af660dce2b23c78b65d951&language=en_US&ref_=as_li_ss_tl
With this file you will be able to print Ejection Canister for Rocketry with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Ejection Canister for Rocketry.