Elegoo Mars stand with drawers

thingiverse

A stand for Elegoo Mars. It has two drawers for small accessories like wrenches and gloves. The top has a cutout so the fan is not blocked. If you have a USB extender to move the USB drive port to the front, you can route it under the stand or between the stand and the printer. Everything prints without supports. The stand is tall and may give you adhesion problems if the print warps. First, try the mouse ears to improve the adhesion of the corners; if this doesn't help, try the brim. The drawers are easy to print if the bed is sufficiently level. I recommend using one drawer with two handles and one with one handle, easier to gran the handles when they are not next to each other. This stand can be printed from PLA, PETG, or ABS (if you can control the warping). No supports are needed. Larger nozzle prints faster and makes the print stronger, but is not required. Four perimeters with the 0.4mm nozzle should be enough, I used 15% gyroid infill. For the drawers use enough top and bottom layers that the bottom does not have any infill, how many depends on the layer height (and you can use taller layers, like 0.32mm)