Elegoo Mercury X Wash Station Replacement/Repair

prusaprinters

<p>The model replaces the defective magnetic wheel of the Elegoo Mercury X Wash Station which made loud noises after a few days of use and no longer turned the liquid in the tank. After a brief inspection, it became apparent that the plastic connection between the stepper and the magnet wheel was cracked.&nbsp;<br>With the help of the following model, the defective magnetic wheel can be replaced and optimised. The axial bearing serves as a support so that the entire magnetic force does not have to be held by the stepper wheel connection, and instead is supported by the axial bearing.</p><p>Print settings:<br>- Material - PETG<br>- Support - OFF (Magnet/Bearing face up)<br>- Infill - Cubic (20%)<br>- Wall lines - 3</p><p>Additional Parts Required:<br>- 4x M3 threaded insert&nbsp;<br>- 1x M3 screw ~20mm&nbsp;<br>- 1x M3 nut&nbsp;<br>- 1x Axial ball bearing 12x23x7.5mm&nbsp;</p><p>(https://www.aliexpress.com/item/32346963791.html?spm=a2g0o.order_detail.0.0.55e8f19cdz6cws)</p>