Elephant Phone Holder (Multi-Extruder Remix)

prusaprinters

<p>This is a remix of <em>ginkobilova's Elephant Phone Rack</em> made specifically for multi-extruder printers (though I have included a one-piece model for single-extruder machines).</p> <p><strong>Please be aware that the colourized version of this model was not designed to be printed in pieces on a single-extruder machine and assembled afterwards.</strong> Use elecell_onepiece.stl to get everything at once in a single colour.</p> <h3>Print instructions</h3><p>The original model has been split into individual parts, and the base has been modified to remedy some issues I had with the bottom of the original. I have also added a very tiny remix of <em>YahooJAPAN's Frog</em> along with a couple of lily pads for an additional splash of colour.</p> <p>The print in the cover photo was done on a quad extruder Prusa i3 MK2 MMU as follows:</p> <ul> <li><strong>elecell_base.stl</strong> <em>silver PLA (extruder 1)</em></li> <li><strong>elecell_water.stl</strong> <em>blue PLA (extruder 2)</em></li> <li><strong>elecell_lilypads.stl</strong> <em>green PLA (extruder 3)</em></li> <li><strong>elecell_frog.stl</strong> <em>green PLA (extruder 3)</em></li> <li><strong>elecell_elephant.stl</strong> <em>white PLA (extruder 4)</em></li> </ul> <p>In addition to the .stl files used in my print, I have included the following:</p> <ul> <li><strong>elecell_onepiece.stl</strong>: This can be used to print everything at once in a single colour/material.</li> </ul> <p>When printed at 100% size, the model measures approximately 135mm wide, 116mm deep and 116mm tall.</p> <p>Happy printing!</p> <p><strong>SOURCES</strong></p> <ul> <li><p><em>ginkobilova's</em> Elephant Phone Rack<br/> <a href="https://www.thingiverse.com/thing:463879">https://www.thingiverse.com/thing:463879</a></p> </li> <li><p><em>YahooJAPAN's</em> Frog<br/> <a href="https://www.thingiverse.com/thing:182144">https://www.thingiverse.com/thing:182144</a></p> </li> </ul>