Ender 3 BMG V6 clone with creality fans

cults3d

https://youtu.be/WVlCcw_Ls6A - Assembling animation. Older version but still works. This is my attempt of ender 3 direct drive with clone BMG (Fysetc) and clone V6. I accidentally bought V6 without fan so i decided to make this with original fans. Its second iteration of this project and changes are based on flaws that i found in the first printed version that im using about several days. Nozzle is about 8-10mm before printer bed so printing Y axis is "shorter" about that value. This problem can be "fixed" by moving printing surface, changing home offset in firmware or just some slicer tweaks. With standard motor you will need new X endstop housing part. Updated with new fan duct, lid part and some minor tweaks. "GrillPart.stl" is supposed to be a modifier\part of LidPart in your slicer. With this you can make cover with infill pattern. If you add a part to lid in PrusaSlicer then grillpart should be placed automatically in right place. In other slicers you need to move that modifier in right place manually. Then you can rotate whole to right orientation. After that set per-model settings of GrillPart to 0 or 1 perimeter without top and bottom and adjust infill. For this thing you need additional screws. For cooling fan: - 2 * M3x12 + 2 * M3x19 OR 4 * M3x12 M3x19 will better hold the "lid" part from side <li>For "lid" front side: <dl> <dt>- M2x(+9) with nuts </dt> <dd>OR</dd> <dt>- M3x(+9) with nuts</dt> <dd>Holes are 3mm because i thought 3mm would be better but my M2 screw works good and they are smaller so used them. Check head size of your M2 screws or change holes size.</dd> </dl> </li> <li>For main part: <dl> <dt>- threads of original heatsink: M3x12 with nut</dt> <dd>optionally two screws with nuts, more info below</dd> <dt>- thread of original hotend housing (looking frontside left one): M3x9</dt> <dd>for second thread you can useoriginal screw</dd> </dl> </li> <li>For new X endstop housing: <dl> <dt>- M3x19</dt> <dd>its possible to use longer screw but it requires modification in model</dd> </dl> </li> Isolation cotton from upper side of heatblock may be required! Original blowing fan duct works. Fan is mounted with original ender 3 screws. This cable chain https://www.thingiverse.com/thing:2920060 will work with this design.