Ender 3 Face Shield 5 Stack w/ Settings (3DVERKSTAN)

thingiverse

For anyone struggling fine tuning prints or wants to get started fast these files and settings are specific for an Ender 3 with 0.4mm stock nozzle. The design being used is from Northeast Face Shield Project https://www.nefaceshield.org/ https://cults3d.com/en/3d-model/tool/smoothed-more-comfortable-version-of-protective-visor-by-3dverkstan These settings will allow you to print 1 mask/hr stacked. Ender 3 CURA Settings Listed Below Most Importantly for Stacked Face Shields to Work - PRINT THIN WALLS (Checked) - Layer Height: 0.3mm - Initial Layer Height: 0.25mm - Line Width: 0.5mm - Wall Line Width: 0.5mm - Outer Wall Line Width: 0.5mm - Inner Wall Line Width: 0.5mm - Wall Thickness: 1.5mm - Wall Line Count: 5 - Top/Bottom Thickness: 1.15mm - Top Layers: 15 - Bottom Layers: 15 - Printing Temperature: 230C - Build Plate Temperature: 65C - Print Speed: 80mm/s - Top/Bottom Speed: 35mm/s - Enable Retraction: (Checked) - Maximum Retraction Count: 100 - Minimum Extrusion Distance Window: 10 - Enable Print Cooling: (Checked) - Fan Speed: 100 - No Supports - No Build Plate Adhesion