Ender 3 Pro LCD Enclosure Raspberry Pi4 with camera cable

thingiverse

<h1>Use</h1> <p>This is a LCD Enclosure I modeled for my Ender 3 Pro with Raspberry Pi4 and accomodates the ribbon cable for my Pi camera.</p> <p>It re-uses the front mount socket head screws but you will need to supply (2) M3 bolts and (2) M3 hex nuts. I used M3x12 bolts, but anything longer than x10 would work.</p> <h1>Supports & bridge</h1> <p>To print this - you do NOT need supports. I spent a lot of time designing this to print flat on the outsides and not use supports as I wanted a cleaner, assembled look. As a result I did have to use mechanical fasteners (nuts and bolts) to assemble, but they are on the inside and don't take away from the overall look of the Ender 3 Pro.</p> <p>Since there are no supports, you should adjust your bridging settings to slow down. The only area this is critical is the opening on the back for the USB and Ethernet port opening. Otherwise you might get stringing. </p> <h1>Design</h1> This is an original design using the following sources: https://github.com/Creality3DPrinting/Ender-3 https://grabcad.com/library/creality-ender-3-pro-1 <p>This was designed for the Ender 3 Pro, but the Ender 3 base model uses the same LCD support bracket, so it should work for that as well. I'm happy with my variant and have included the final STP file for anyone who wants to remix this.</P