Ender 3 Pro TF to SD adapter plate

thingiverse

This is an adapter for the Ender 3 Pro Printer. Instead of using the ribbon cable adapter, this uses the attached Cablecc SD card adapter. If your TF card adapter spring is worn and does not hold the TF card in, this will actually fix that problem. The adapter will hold the card adapter in with pressure. NOTE:!! The adapter goes into the TF slot upside down with the gold pins at the end of the card UP! The model was printed on a Mars Pro Resin printer. If done on a FDM, there may have to be some rework due to the difference in tolerences. The 2 frame screws hold it inplace. If the Card is loose, use a bit of hot glue to hold in place. The attached is the link for the Angled USB cord. Pay attention as there is a left hand and right hand. This is the correct one. Correct Angled USB cord CABLEDECONN 6FT Mini USB B Type 5pin Male Left Angled 90 Degree to USB 2.0 Male Data Car GPS Devices Cable https://www.amazon.com/gp/product/B00YTFDC8O/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 TF to SD card adapter Cablecc SD Card Socket Female to Micro-SD TF Male Memory Card Kit Extension Adapter https://www.aliexpress.com/item/32828493769.html?spm=a2g0o.productlist.0.0.666f3939K6NZTE&algo_pvid=bcb50ff8-6081-4815-be2c-b251fcdca663&algo_expid=bcb50ff8-6081-4815-be2c-b251fcdca663-0&btsid=0bb0623016029818777464674e3a0d&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_