Ender 3 (Pro) with Pheatus Dragonfly BMS
thingiverse
update 28.04.2021: the BL-Touch version is perfekt. sensor offset: x=28mm Y=3,25mm Z=-2,43mm Modification kit to mount a Pheatus Dragonfly BMS on the Ender 3 (Pro). The adapter is necessary so that the heat block including the silicone sock does not hit the carrier plate of the Ender 3 (Pro). The housing is available in two versions with and without a BLT sensor, but the version with BLT is still being tested and probably needs an adapter so that the BLT comes down far enough. The nozzles for component cooling are available in two versions, but they do not produce any difference in the result, V2 should just have a little more distance to the heat block. Almost all original screws can be used, only longer M3 screws are needed for the hot fan. I printed the components in resin, but it is also possible with common filamet, in the test phase I printed them in PLA to check the dimensions. update 01.08.2021: upload a +5mm Version of the fanduct, for BLV Mod.
With this file you will be able to print Ender 3 (Pro) with Pheatus Dragonfly BMS with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Ender 3 (Pro) with Pheatus Dragonfly BMS.