Ender 3 Raspberry Pi 2/3 mount (UPDATED V2)

thingiverse

Ender 3 Raspberry Pi 2/3 mount ========================= __It should fit without problem if the printer is calibated. If not please consider to calibrate it, or print 101% scale.__ _07/10/2018_ 30mm fan added THERE IS NOW A 2 RAILS VERSION: https://www.thingiverse.com/thing:3075921 UPDATED V2 Basically i switched the front and the back, I find it to be stronger. V2 FILES ARE NOT COMPATIBLE WITH V1 I made this Raspberry Pi mount for the Ender 3 because i didn't want to use screws and I wanted the hole for the RasPi Camera. Since I'm planning to leave it always on, I decided to put a 40mm fan wich gives me a temperature drop of 10-15 degrees (during a print it stays at 42 °C with a room temperature of 28 °C). However I included a version of the top mount without the fan hole in case you don't want it. This box can be easily slide into the Ender 3 frame as shown in the photo. You only have to remove the 2 screws wich are holding the printer screen. To design it I used this model of the Raspberry Pi that is incredibly detailed and well built. https://grabcad.com/library/raspberry-pi-3-model-b-reference-design-rpi-raspberrypi-raspberry-pi-solidworks-cad-assembly-1 and this fan https://grabcad.com/library/fan-40-x-40-mm-1 Any suggestion on how to improve it is very welcome. If you have any doubt, do not hesitate to contact me, I'll try my best to help you. _____________________________________________________________ __If you like what I do and want to support me, head to https://www.paypal.me/giacomo30196 every bit helps me to make more things for you.__ __THANK YOU!__ _____________________________________________________________