Ender 3 S1 Pro Filament Holder Adapter

prusaprinters

<p>Creality Ender 3 S1 Pro filament holder extension adapters.</p> <p>Used for adding an additional roll of filament to the standard S1 Pro filament holder.</p> <p>You need a 20mm wardrobe rail from somewhere like B&amp;Q in the UK, and then cut it down to the width you require. The standard mount will take the wight of 2 rolls easily, placed 1 either side.</p> <p>Add some insulation tape or similar to either end of the rail to keep the rolls in place.</p> <p>Mine goes into a hole in an adjacent bookcase to allow for up to 6 rolls at a time. You could also add a second standard creality filament bracket to the other side of the printers top rail, to accept 3 rolls of filament completely supported by the printer.</p> <p>You need to print 2 of these to go either side of the standard bracket.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Ender 3 S1 Pro</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div> <p><strong>Infill:</strong></p> <p>20%</p> <p><strong>Filament:</strong></p> Any PLA+ <p>Any</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>10% supports everywhere will ensure good fitment and add minimal time to the print.</p></div> </p></p> Category: 3D Printer Parts