Ender 3 V2 External power supply support

cults3d

External Power supply support for Ender 3 V2 + cover. You'll need to cut the original PSU cover to fit a 92x92 mm fan. You'll also need to do some rewiring. It's not really hard but it can be dangerous ! It's a Power supply !! Also check the voltage of your original Power Supply Fan. Mine is a 12V. Sometimes it's 24V. Use a buck converter if needed. Noctua fans are 12V. If you print the support with an Ender 3, you'll need to print the two half (cover01.stl + cover02.stl). The ender 3 is too small to print the entire support. Everything will fit perfecty. To fix the cover to the box you'll need self-threading screws. To fix the Power supply to the box, you'll need M4x6 screws. To fix the entire box to the side of the printer, you'll need M4x10 screws with T nuts. At the end your Power supply will breathe better and will be a lot more quieter I've use a Noctua 92x92x25 mm fan. Works like a charm !