Ender 3 (V2&PRO) or CR Riser Feet 45mm TPU

prusaprinters

<p>This is a remix of a <a href="https://www.thingiverse.com/thing:5061632">remix</a>. &nbsp;I rised the foot at about 48mm high (45mm the foot + 3mm the base) in order to have space for more cooling case for MCU and PSU.&nbsp;You can scale the foot only on Z in slicer based on your needs.&nbsp;<br><br><strong>Print Instruction:</strong></p><ul><li>Foot_PLA.stl - PLA or PETG, 4 perimeters, 20% infill gyroid, 0.2mm layer high or more, 5 layers top and bottom, print as it is (upside down) without supports</li><li>Base_TPU.stl - TPU 100% infill</li></ul><p><strong>BOM </strong>- for one foot</p><ul><li>2 x M4x16mm Hex Socket Head Screws</li><li>2 x M4 t-nuts</li><li>2 x M4 washer&nbsp;</li></ul><p>If you want 4 feet you will need 8 screws, 8 t-nuts, 8 washer. But you could use more feet if you wish.&nbsp;</p>