ENDER 3V2 power supply cover 92mm fan silent mod

thingiverse

I modified Sectorone's PSU cover that holds a 92mm fan. I made the whole model able to fit on a 220x220 bed. I also added a recess in the model so the model WILL NOT touch the transformer inside the PSU. I also added a hole as a second way to run the fan wires, since the one on the model didnt work for me. The cover is designed to hold a 92mm fan. I will provide all the links to the fan and models that i used for the whole project below. My psu fan is now quieter that my parts cooler fan. you will also need a few other models to work with this. I will also link them. Since i made the model smaller, you will need to print a second piece to cover up the exposed wires. you will understand when you remove the cover. You will also need to print taller feet/risers for the ENER 3v2. i also printed a 92mm fan guard. everything except for the fan guard is required for the mod. just use the black and yellow wire on the Noctua fan. yellow is +12v. you can just clip the pigtail off the OEM fan and the Noctua fan and solder/crimp the wires together and plug it back in. yellow to red. black to black. The fan mounts on the OUTSIDE of the PSU cover. DO THE MOD AT YOUR OWN RISK. POWER SUPPLYS CAN BE VERY DANGEROUS. that said, it was fairy easy. no tight spaces and easy to work with. sadly, i forgot to take pictures during the process and when i was all done. Noctua 92x14mm fan https://www.amazon.com/gp/product/B009NQM7V2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 WhisperGod's power supply cover to cover up the exposed wires https://www.thingiverse.com/thing:5146129 squirrelf's Ender 3v2 feet risers. I used the 38mm, but would probably use the 45mm if i did it again. https://www.thingiverse.com/thing:5146129 robertd33's 92mm fan guard. this is optional. https://www.thingiverse.com/thing:4727426