Ender 5 Duet 2 Wifi mount

Ender 5 Duet 2 Wifi mount

prusaprinters

<p>This mount enabled mounting of a Duet 2 Wifi in a Creality Ender 5 printer using only the existing mounting holes.</p><p>There will be no access to USB or SD card after the card is mounted. Nor can the original cover be used.</p><p>Since mounting the much larger Duet 2 card requires the PSU to be shifted there is also brackets for that.</p><p>As can be seen from the photos, the PSU is a very tight fit around the power connector and button, but can be done. No cables need to be replaced.</p><p>I have included F3D and step files for anyone who want to make adjustments. Note that the duet mount has an unfinished fan mount in the F3D file that is not included in the stl file.</p><p>@Required hardware@</p><p>To mount the PSU you will need four extra M4 bolts, about 10-15mm long. Mounting the Duet board requires four M3 bolts, about 6-10mm long. You should be able to reuse the screws that hold the cover.</p><p>@Print settings@</p><p>Print one Duet mount and two PSU mount. Since both has printed threads right through I would suggest 0,1-0,12mm layer height. 2 perimeters and 10-20% infill will be plenty.</p><p>Category: 3D Printer Parts</p>

Download Model from prusaprinters

With this file you will be able to print Ender 5 Duet 2 Wifi mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Ender 5 Duet 2 Wifi mount.