Eufy doorbell camera 55 degree mount

thingiverse

The Eufy doorbell camera included 15 degree mounting bracket is not sufficient for mounting on a wall 90 degrees from the door. 55 degrees provides enough visibility to be useful. I added 2 additional screw holes, as I didn't want to rely on heavily angled screws to hold it to the wall. The original screws were used in the new countersunk holes to hold the mount to the wall, then 2" #6 wood screws through original holes in the metal mounting bracket to hold that to this mount (and the wall). Upon installation I found the 15 degree mounting bracket still needed to be used in addition to this mount to keep the corner of the doorbell from hitting the wall. Version 2 is added to address this problem, by extending the wall surface straight out 2mm to provide clearance from the wall for attaching the doorbell. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Eufy_55_degree_mount_alt_for_brick.stl" added that attempts to allow the backing plate to screw just into the mount instead of the side of the wall to be attached to. This may or may not work with the 15-degree mounting bracket, as the holes won't line up with the additional 15 degrees. Suggest printing this version at a much higher infill, as the body now has to hold screws in place - maybe 70%? I have not tested this version.