EVA 2.3.0 Kywoo Tycoon with Orbiter Extruder and Dragon Hotend

thingiverse

This project is a modification of EVA 2.3. 0 to put it in the Kywoo Tycoon with Orbiter Extruder and Dragon Hotend, I have not tested it yet, it should fit well, but I still have to test and see how it works and rectify if there is any error, it is a project in process, currently I do not have time to finish it, but in a few months I will do the necessary tests to make it all ready, if you want to download it and try it yourself you can do it and tell your experience, it will help me when I do the tests, also in the official website of the project you have more alternatives of extruders and hotends that you can use adapting them to the pieces that I have modified, I leave here all the pieces that I will use in my project, both those that I have modified and those that I have chosen from the official website of EVA 2. 3.0 https://main.eva-3d.page/ my sincere thanks to the author of EVA for his great work. External Thin Walls Type in Simplify3D must be in this option for the walls to print correctly "Allow single extrusion walls", 2 perimetres and linear infill, if you use another slicer you must look for the similar option, all the pieces are oriented in the correct position to print without supports, there are two pieces that have the supports incorporated as I had to modify them to hold the X strap and the supports are necessary, the Extrusion Width option must be in manual 0. 45mm, all the screws used are described on the official EVA website, you will only need three extra screws to attach the X strap piece to the back of the carriage, you can use M3 x 8mm screws. The piece MOD_tension_slider_6mm_belt_M3s must be sanded to fit perfectly. My YouTube Channel https://youtube.com/3dmakeres