EVOC magnetic tube clip

prusaprinters

<p>I managed to snap off the clip from the original tube clip I bought even before I got it out of the cardboard packaging!</p><p>You can “peel” off the remaining plastics around the magnet (with side cutters) and then place the magnet inside this printed replacement part.</p><p>&nbsp;</p><p><strong>Print instructions:</strong></p><ol><li>This part is super critical on the print orientation because of the clip geometry!</li><li>See picture f at least one working print orientation.</li><li>Layer height of 0.1 mm and 100 % infill produces sturdy part. Have not tested any other settings.</li></ol><p>&nbsp;</p><p><strong>Build instructions:</strong></p><ol><li>Note that the original EVOC magnet shape is NOT symmetrical like a coin.</li><li>Flat face of the magnet is same side as the clip.</li><li>Push in the magnet from the opening at the side.</li><li>No glue, no nothing needed.</li></ol><p>&nbsp;</p><p><strong>Enjoy!</strong></p>