Faberdashery Spool

thingiverse

This is a spool specific to Faberdashery filament that comes in package of 100 meter, well... without a spool !! Like our famous filament spool stand v3: http://www.thingiverse.com/thing:296971, NO ADDITIONAL PARTS are needed, just sandpaper and glue. It can be used with 1.75 or 3mm filament. [update 05/03/14] I adjusted the fork's length (V2) to be more compatible with every size of coil from Faberdashery. Instructions Printing parameters 2 outside walls 30% infill You will need a 13 (W) x 13 (L) x 2.5 (H) cm of printing volume (it can be printed on a Printrbot Simple Metal. Print & assembly Print: 3 x faberdasherry-spool-fork-V2.stl 1 x faberdasherry-spool-side-A.stl 1 x faberdasherry-spool-side-B.stl Assembly: Sandpaper the 2 sides to fit in together (if needed) Then glue Side A with side B. Keep the alignments of notches. Slide 2 forks in their Notches. Put the filament into the two forks Place the third fork by deforming the spool fo filament Fit the filament tip into one of the 3 fork's stop holes You are done