Facemask case

prusaprinters

<h3>Facemask case</h3><figure class="image"><img src="https://media.prusaprinters.org/media/prints/64791/rich_content/7c981a08-6455-42a6-9781-b0e336c28eac/facemask-case.png#%7B%22uuid%22%3A%22448c2efb-483d-4c0c-b8ea-cedcea18817c%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D"></figure><p>Print-in-place double hinges facemask case, no assembly required! Perfectly fits almost every type of facemask. Tested with surgical face masks, FFP3-FFP2-FFP1 facemasks <strong>without</strong> valves. The closure is ensured by a snap-fit joint. If printed in PETG it can be easily disinfected with alcohol. (I think Alcohol can also be used on PLA without damaging it, but I've never tried)</p><p>If you like this design, please consider buying me a coffee to support me in the creation of many other useful designs as a sign of gratitude for the huge amount of time and effort. Thank you very much and happy printing!</p><h4>Print instructions</h4><ul><li>Orientation: the model is already in the best orientation.</li><li>Layer height: 0.20 mm (reccommended) or lower.</li><li>Supports: There are two versions available, with and without cross-shaped supports. It's convenient to print the version with cross-shaped supports in case you want to print it in different colors, so you can print the facemask and supports in color 1 and re-use these supports to fill the cross-shaped slots of the second colored facemask case :)</li><li>Material: PETG (recommended); PLA.</li></ul>