Fantastical Hammering Low-Profile Square Base Collection

thingiverse

These bases are designed to match those provided for a beloved but now unsupported game of fantasy battles *in terms of their footprint only*. They are not a direct 1:1 match for the originals, they're intended to be used with each other. There are a handful of additional sizes(marked with an - in the list below) I added myself, they can be used for skirmish games where a model doesn't quite fit on an established size, or as unit fillers. All bases are 2.4mm thick overall, with an 80 degree chamfer. EDITED 10/10/19 - Having begun printing in large numbers, I'm altering my recommendation for best result prints; in your slicer orient the bases with the top surface facing the build plate, then raise them up somewhere around 1mm(I used 1.2mm since I'm using an Ender 3 and 0.12 layer height), and generate supports using(in Cura) Grid as the pattern and a density of 30-40%(depending on how good your print cooling is - if in doubt do 40%). This provides the most accurate dimensions - to the tolerances of your printer - and easiest support removal. EDITED 20/10/19 - Added a 25mm hex base, for oddities like Fanatics. EDITED 25/10/19 - Had a request to add an octagonal version of the above. The pack includes: 20mm square 25mm square -25mm hex -25mm octagonal -30mm square 40mm square -50mm square 100mm square 25x50mm rectangular -30x60mm rectangular 50x75mm rectangular 50x100 rectangular 60x100 rectangular 100x150 rectangular