Fastener - suitable for IKEA Samla box 45 liter

prusaprinters

<p>The fastener is suitable for an IKEA Samla box with 45 liter and can be used with or without a sealing.&nbsp;</p><p><strong>If used for a filament box:</strong></p><p>For the sealing I recommend to use a foam rubber which is bonded to the box. The thickness of the pressed foam rubber should be about 0,5 up to 1mm.</p><p>On my filament box I´m using 18 fastener. 4 on the short side and 5 on the long side. The used foam rubber have an unstressed thickness of 2,5mm.</p><p><strong>Print instruction:</strong></p><ul><li>Fastener is not a print in place part</li><li>Printed without supports</li><li>Material: PETG or similar</li></ul><p><strong>Assembly instruction:</strong></p><ul><li>Assemble the parts as shown on the picture</li><li>The connection of the plate and the pins is designed as a press fit, but can be assembled by hand. If not, use a vice or a gripper to connnect the parts.</li></ul><p>&nbsp;</p>