FatShark 600TVL FPV Camera Tilt Mount for Armattan F1

thingiverse

A tilt mount for your Fatshark 600TVL fpv cam. I've designed it specifically with the Armattan F1 in mind, but it's a fairly common method of mounting an FPV cam these days so it should work on a handful of other quads as well. The camera is simply popped in from the back of the mount. The lens cover will not fit through the opening, so you'll have to remove it to install the mount. If you printed it face down the ridges from the print layers should grab the seam between the 2 halves of the camera and hold it in place quite well. If it loosens off over time and no longer stays put, just put a dab of hot glue on the edge. The tilt holds OK with friction alone, but you should really use a dab of hot glue on each pivot to fix it in place at your desired tilt angle. Print Settings Printer Brand: Printrbot Printer: Simple Black Rafts: No Supports: Yes Resolution: 0.15mm - 0.3mm Infill: Min 20% up to 100% Notes: Print in ABS or PLA. Only put 1 support under each of the round tabs on the sides (total 2) How I Designed This FPV Cam mount in RED Designed using Rhinoceros based upon the original DXF files provided by Armattan Quads. www.armattanquads.com