FatShark Pilot HD V2 mount for ZMR250 Frame (V2 PDB)

thingiverse

Mount for the FatShark Pilot HD V2 to the ZMR250 frame from FPVModel (with the V2 PDB). The bottom shell fits in the square hole in the Power Distribution Board and positions the camera at an 11.8 degree angle (just the way the trigonometry worked out). The top bracket fits into the front two Mobius mount holes. I used two layers of 3M Scotch foam tape on the top bracket to hold the camera firmly. Two small strips of foam tape keep the bottom shell in place over the hot glue. Mount positions the camera behind the front edge of the ZMR250 frame so you wont damage your camera in a head-on collision. The camera view is clear with none of the quad in the shot. If you carefully file the center slot wider, you can get the micro SD card in and out without taking apart the quad after every flight. Be careful with Carbon fiber dust, it's conductive. Print Settings Printer Brand: Printrbot Printer: Simple Black Rafts: No Supports: Yes Notes: Used a brim for both, with supports for the bottom shell