Featherboard for Parkside tablesaw

prusaprinters

<p>I was looking for this part but found nothing compatible with my Parkside tablesaw guide rails (ref PTK 2000 E3), so I quickly designed one.</p><p>It should be compatible with other models with same guide rails.</p><p>You will need two M5x40 screw and nuts (I only had M5x50 when I took the illustrating picture), plus two large M5 washers.</p><p>Please look at the appropriate manual provided with your equipement for all the security warnings relative to tablesaw usage.</p><p>I may briefly notice two fondamental points with featherboards usage :</p><p>1/Featherboad must be positionned before the rotating blade. Not side by side with the blade, and not after the blade</p><p>2/"feathers" must point to the operator's opposite direction</p><p>See a quick usage example here :&nbsp;</p><figure class="media"><oembed url="https://www.youtube.com/watch?v=Bl-hQDwhxpo"></oembed></figure><p>&nbsp;</p><p>Enjoy and please feel free to leave comments and suggestions to improve this model.</p><p>&nbsp;</p>