Feeding bait boat

cults3d

This is a bait boat, for carp fishing enthusiasts. This boat allows the removal of 2 lines and their baiting independently. A 6-channel transceiver is required. Improvements are to come to integrate a GPS, a camera and lights. The hull is designed to accommodate 2 propulsion engines. It has 2 independent hatches and 2 line throwers. 4 servomotors are thus necessary. The opening and closing of the line feeders are operated by 2 servomotors which push/pull a metal rod (2mm) which passes through the line feeder. The .stl file of the hull is divided into 3 parts (forward, middle, aft). I use epoxy glue (Araldite) to glue the PLA parts of the hull and other accessories (engine mounts, servomotors...). The hull is then painted to protect it from humidity (or at best, apply a coat of gelcoat). All the files I use to operate the boat are included: 3-part shell + files for reinforcements during gluing mounts: motor, servomotor (micro size 9g), drive shaft line-releasers carrying handle hoods with locking system For the trapdoor opening system, it is necessary to print in PETG the file named "tige_shape" and the file "shape_V2". The files "shape_1" and "Shape_2" are useful if you want to use a 4mm aluminium rod. Dimensions : length: 39.5cm width: 27cm height: 13cm The hardware and electronics I use in addition: Engines :2826 1200KV ESC: 30A Receiver :FrSky V8FR-II HV Transmitter: Taranis X Q7 (simpler and much cheaper models are available) Battery: Lipo 3S Actuator: micro 9g 22.8 x 12.2 x 28.5mm Propellers: 3 blades 36mm Shafts: 8/4mm Aluminium rod for trapdoor opening system: 4mm