Feet for small quadcopters
thingiverse
these are feet that will give you about 30mm of clearance they come in 2 parts. The longer tubes with a small hole on one end, and a separable foot. Step 1 print the gears out of PLA or ABS with normal settings. Step 2 Put the gears on first with a screw anywhere on the frame. Step 3 Print out the feet with flexible PLU or similar filament.( you could use PLA/ABS is you want, but the idea is to cushion the bottoms) step 4 Cap Gear with Foot and Enjoy Print Settings Printer Brand: Airwolf 3D Printer: AW3D XL Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: normal Infill: normal 90-100 for bigger craft or if you are bad at flying Notes: This is the simplest to print and use.
With this file you will be able to print Feet for small quadcopters with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Feet for small quadcopters.