FETtec 35A ESC to Kiss FCv2

thingiverse

There are two different sides to print. The "Left Side" has a cutout for the FCs serial ports to sit into nicely. A 20mm to 30mm adapter for mounting the KISS FCv2 above the FETTEC ESC. It's designed with the ImpulseRC Apex in mind, but will work for any frame with a maximum of a 20mm stack height. - Use the 10mm countersunk bolts that come with the Apex for the 20x20 holes. - Cut/grind ~2.5mm off of the bolts. You want them 7-8mm long. - Space the ESC up just enough so the serial port isn't touching the bottom plate. - Use the lock nuts to tighten down the adapter pieces on top of the ESC. - Tighten down the FCv2 by screwing M3 bolts into the adapter. Use M3 bolts 4mm to 6mm long.