Fiber Laser Fixture Set

prusaprinters

<p>I have recently purchased a fiber laser, and while it has this handy bed with a lot of tapped holes, there are no pieces that came with it to utilize as fixtures.</p> <p>Amazingly, I didn't find anything out there for models of these, so I made my own. Included are various straight lengths, an L, and a cross. If there are other shapes that you feel may be worthwhile, let me know and I'll add to the collection.</p> <p>The bed of my laser has holes ever 50mm, and uses M6 screws. Using socket head screws will work as well, but these I found at Ace. Each fixture is just a little wider than the head of the screw, and the slots are large enough for the screws as well.</p> <p>The holes are a little bit tight (intended) so you may have to thread a screw into them once or twice. The slot is oversized, so it shouldn't be a problem (and shouldn't cause it to bubble out).</p> <h3>Print instructions</h3><h3>Print Settings</h3> <p><strong>Printer:</strong> Chiron</p> <p><strong>Rafts:</strong> No</p> <p><strong>Resolution:</strong> .2</p> <p><strong>Infill:</strong> 75%</p> <p><strong>Filament:</strong> Overture PLA Black<br/> <strong>Notes:</strong></p> <p>Be careful removing them from the bed, it is easy to bend them if you get too crazy with a spatula</p>