Filament Cabinet Solution

thingiverse

This is my first upload so be gentle! I've only been in the 3D printing world for a week. :) I saw RilleRick's dry cabinet and printed out a piece. For me, it felt a little thin for the weight that I imagined the two poles were going to be holding, and I wanted a bit sturdier connecting "tissue" between the two sides so that it would hold itself steadier (i.e. level) while I mounted it. Plus I wanted some practice designing my own piece so I used RilleRick's as inspiration but started from scratch using sketchup (file is included). The complete parts list for my cabinet: * Ikea cabinet with glass: Billy/Morliden (392.873.79) for the cabinet/door combo (Ikea sells the cabinet as 802.638.32 and the glass door as 302.797.55) * Aluminum rods: Home Depot: Everbilt 1/2 in x 36 in * Lights in cabinet: https://www.amazon.com/gp/product/B07FNNHHST/ref=ppx_yo_dt_b_asin_title_o08_s00 * Humidity/Temperature Sensor: https://www.amazon.com/gp/product/B07L4QNZVF/ref=ppx_yo_dt_b_asin_title_o04_s01 * Magnetic catches: https://www.amazon.com/gp/product/B07Q25J89Y/ref=ppx_yo_dt_b_asin_title_o05_s00 * Dehumidifiers (2): https://www.amazon.com/gp/product/B000H0XFCS/ref=ppx_yo_dt_b_asin_title_o06_s00 * Number 6 x 1/2" self-drilling screws (8 per row) I cut the aluminum to 14.25" lengths so I got one set of two per purchased rod. This cabinet will fit four rows of rolls and I get about 5-6 rolls per row. I separated the rows by 9". The printed piece will exactly allow these screws to disappear into the piece while still holding it tightly to the cabinet you mount it to. This is a STRONG solution. It supports a lot of weight. The lights are motion detector activated so when I open the glass door, they come on. I'm really happy with the solution.