Filament feeder guide for Creality CR-10 v2 608 bearing
prusaprinters
<p>When loading filament into the CR-10 v2 from the top the filament can put stress on the filament sensor. The filament rubbing against the sensor entry has the potential to leave debris that can block the sensor and can sometimes squeak. This pulley assembly is designed to help relieve the strain and ease the filament into the filament sensor.</p><p>Add a 608 skateboard bearing to the pulley. The mount slides onto the chassis for the filament feeder. Be sure to align the pulley with the entrance to the filament sensor. I used a 608 ZZ skateboard bearing in the pulley.</p><p>Version in photo was printed on Creality CR-10 v2 with generic PLA, 0.4mm nozzle, 0.2mm layer height.</p>
With this file you will be able to print Filament feeder guide for Creality CR-10 v2 608 bearing with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Filament feeder guide for Creality CR-10 v2 608 bearing.