Filament guide for Prusa Mini

prusaprinters

<p>I wanted the filament to load into the Mini like on the Mk3 so I designed this bracket that bolts onto the T slot of the frame.</p><p>I found if the filament roll has a small amount of filament on it when the printer unloads it, the roll flys of the stand</p><p>You will need two M3 nuts, two M3x15 screws and a PC4-M6 Quick Fit connector.</p><p>Print two T-Nut 25 singles and the filament bracket.</p><p>The top hole will need tapping out 6mm, it is possible to screw in the connector without tapping but not so easy (I don't have the skill to put a thread in it, but I have added the CAD file (RSDOC) so if you want to modify it with RS DesignSpark Mechanical feel free).</p><p>If you want the filament roll holder I use it's here: <a href="https://www.prusaprinters.org/prints/2893-print-spool-holder">https://www.prusaprinters.org/prints/2893-print-spool-holder</a></p><h3>Print instructions</h3><p>Printer: Prusa</p><p>Model: Mk3S</p><p>Rafts: No</p><p>Supports: No</p><p>Resolution: 0.2</p><p>Infill: 20%</p><p>Filament: Prusa Lipstick Red PLA</p>