Filament Passthrough for an Ikea (TINGBY) based enclosure

thingiverse

This is a filament pass through for a printer enclosure. It was designed for my enclosure which is based on an Ikea TINGBY coffee tables. I'm pretty sure there are few if any folks out there using the same, so this is a very niche design right now. If you can provide exact dimensions for say a Lack enclosure's thickness, and want to try this (and will provide feedback), I can probably remix it to fit that style as well. It required the following parts: 3x M3x45mm screws 3x M3 nuts 1x P18 17.8 x 2.4mm O-ring (for the ball) 1x 22 x 3mm or 22.1 x 3.5mm O-ring (for the cap) I used an older version (91512) of the following O-ring kit from Harbor Freight which has the required parts: https://www.harborfreight.com/397-piece-metric-o-ring-assortment-67580.html Everything should print with supports touching the buildplate, and they should be rotated to minimize supports. If you make one please post it, any questions let me know. STEP file is included for easy remixing too, but I noticed that the "INSIDE" part is munched in that file, I've tried several things to correct it. but could not get it to export without the problem. The other parts in the STP look correct however. Due to the difficulty of aligning holes and such, I made 2 templates. One template is a basic drill guide, and the other has a stop - and is the one I used on my enclosure. I used a 1 3/8 Forstner bit to cut the hole. I will add some pics showing the installation as well, but the hardest part is alignment of the holes.