Filament shelving / Spool shelving / Filament storage / Spool shelving / Spool storage / Filament storage

cults3d

Rack for 3D filaments consisting of: Bracket (x2) printing part. Clamp (x2) printable part Aluminium tube 20mm diameter (x2) material to purchase I used a 1m length of tubing and about 15 coils fit through it. The weight has not been a problem, I built it a year ago and have had no problems. ASSEMBLY MOUNTING First we must put the tubes in both squares creating the main structure. If the holes are a bit tight for the tube you can apply heat to the bracket to be able to fit it; although this was not my case. To continue you must present the shelf and mark where the staples will go. then present the staples and mark the holes in the wall. Once the holes are drilled, the staples should be screwed to the wall with 6mm screws. Once they are securely fastened, fit the shelf with the staples from top to bottom, making sure that each clip fits into place. Now we could place and organize the coils in an accessible and comfortable way.