Filter Holder for Tokina 16-28mm Lens - 150mm Glass

thingiverse

​150mm Filter Holder for the Tokina 16-28mm Lens - PLA After 3 previous flaws in design (Too much vignetting at 16mm) I finalised with this one and based it on the 150mm glass. This design has NO vignetting at 16mm when testing This design should be able to hold 3 x 150mm (2mm thick) glass for whatever combination you need to achieve. The only extra things you need to buy is 6 x M3x15 countersunk screws (or like me you can just use standard heads!) to sandwich the springplates and topplate to the adapter 6 x M3 Nuts 1 x Self Adhesive Flexi-Seal 25mm wide by 4.5mm Thick - (From Bunnings https://www.bunnings.com.au/moroday-10m-flexi-seal-outdoor-seal-tape_p4114029) this is used as the cusioning between the printed surface and the lens fixed petal so you can easily slide the holder straight onto the lens but still making it a good tight fit. ****NOTE this type of seal has a very thin clear top layer almost like a clear tape which makes sliding the holder onto the lens very smooth without damaging the seal or the lens. https://youtu.be/87lDF8LJGwk