Fire Hydrant Dog Bag Dispenser

thingiverse

This can either be a two or single colored print. All together the model measures 78x65.5x107.5mm, and is printed in six different parts using two different colored PLA filaments. The tolerances between the mating parts is such that no glue is required, just some light force from a rubber mallet to secure them. The bottom cap is threaded for replacing the dog bag rolls. I designed the top and bottom caps with spikes that hold the roll of dog bags. However, this makes printing the top cap tricky with all the supports needed, so in my final print I have the bottom cap printed with the spike and the top without. Experiment to see what works best for you. For two colored print: Print one of hydrantCanister_SpoutHoles.stl and one hydrantBottomCap.stl (either spike or no spike) in red, one hydrantTopCap.stl (either spike or no spike), one hydrantSpout2.stl and two hydrantSpout1.stl in white. For single colored print: Print one hydrantCanister_oneColor.stl, hydrantBottomCap.stl and hydrantTopCap.stl (either spike or no spike) in whatever color you like.