FIRST Tech Challenge motor tensioner
thingiverse
These tensioners are made for use with the 37mm Bore Bottom Tapped Clamping Mount from ServoCity (part number 555116) and the GoBilda yellow jacket motor. The mount diameter of the mount is larger than the diameter of the motor, leaving room for the tensioner, which is a crescent shape with an ID of 35mm (equivalent to the motor’s diameter) and an OD of 37mm (equivalent to the mount). This offsets the motor in the mount, allowing you to tension your belt or chain by rotating the motor. There is also a flange on the tensioner to prevent it from slipping out as you adjust the motor. https://www.gobilda.com/yellow-jacket-planetary-gear-motors/ https://www.servocity.com/37mm-bore-bottom-tapped-clamping-mount/
With this file you will be able to print FIRST Tech Challenge motor tensioner with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on FIRST Tech Challenge motor tensioner.