Fizzini / Sodastation PET Bottle Adapter

prusaprinters

<p>PET bottle adapter for Fizzini / Sodastation handheld sparkling water maker.</p> <p>I just wanted the option to use a 1-liter soda bottle instead of the regular bottles.</p> <p>Special thanks to sirmiro for the "PET Bottle Cap for projects" found here: <a href="https://www.thingiverse.com/thing:2167007">http://www.thingiverse.com/thing:2167007</a> I believe I'm using his project as intended! It saved a LOT of time. This way, I didn't have to design in Fusion360 - this was all designed in 3D Builder!</p> <p>The cap as-is fit my bottle well, but it there was slight wiggle-room in the threads that caused the 1st prototype to not hold pressure well enough. So, by V6, I made it juuuussssttt a few millimeters smaller in the x and y axis.</p> <p>It works pretty well with or without the gasket - not sure which I prefer. With the gasket it holds pressure a bit longer....but it's a bit scary, but the pressure does dissapate :)</p> <p>.stl files include the adapter and an optional gasket.</p> <p>So far, it makes seltzer!</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>ANET AM8 with E3D V6 clone</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>.1 for adapter / .2 for gasket</p></div> <p><strong>Infill:</strong></p> <p>100% for adapter and gasket</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>.stl's are oriented for printing. If your slicer puts supports within the threads - delete them! Supports everywhere else should be just fine.</p> PETG for the adapter, TPU for the gasket </div></p></p> Category: Kitchen & Dining