Flames - wall lamp

thingiverse

The lampshade is based on the "FIRE!" model by Ricardo Salomao: https://www.myminifactory.com/object/3d-print-fire-13374 You need to print 4 parts: - mount.stl = wall mounted lamp part and arm - holder.stl = bulb holder and lampshade retainer - base-XX.stl = lampshade base and ring - flame-XX.stl = flame in the lampshade Print without using supports. The lamp is available in three different sizes, which are defined by the flame height in the lampshade - 18 cm, 21 cm or 24 cm. The basic dimension is 21 cm. Depending on your preferences and dimensions of your 3D printer, choose the appropriate parts for printing: base-XX.stl and flame-XX.stl, where XX is 18, 21 or 24. The parts: mount.stl and holder.stl are the same. Base-XX.stl and flame-XX.stl parts can be glued after printing. Connecting pins and holes can help align these parts with each other. Gluing is not needed if the lamp is not exposed to movement or wind. Instead of printing the base-XX.stl and flame-XX.stl parts separately, you can print them together using base+flame-XX.stl. Then: . you don't need to use glue to connect . you either print in one color, or you have to change the color when printing, . a larger 3D printer is required No need to glue mount.stl and holder.stl or holder.stl and base-XX.stl. These parts are press-fitted. My Cura setting (nozzle size 0.4): layer_height = 0.2 retraction_combing = off support_enable = False fill_perimeter_gaps = nowhere (for flame-XX.stl) gradual_infill_steps = 1 (for base-XX.stl) infill_pattern = zigzag infill_sparse_density = 8 speed_print = 40 speed_travel = 60 top_bottom_thickness = 0.8 wall_thickness = 0.8