Flash adapter with pogo test pins for WLED ESP32 Controller
prusaprinters
<p>Flash adapter with pogo test pins for up to 6 pins.</p><p><br><br>This model is mainly used for the WLED ESP32 Controller:</p><p><a href="https://github.com/Hasenpups/WLED_ESP32_Controller">https://github.com/Hasenpups/WLED_ESP32_Controller</a></p><p> </p><p>The following parts are required:</p><p>3D prints<br>1 x M3x30 screw<br>2 x M3x 10 screw<br>1 x 8mm spring 20mm long<br>1 x jumper wire (1x4 Pins)<br>4 x 1mm Pogo Pins</p><p>The M3 threads are modeled in the design and will be printed, there is no need to cut the threads.</p><p>Attention, there is also a thread in all 3 blocks of the base. This way there is no nut required.</p><p>The pogo pins need to be gently pressed into the holes of the female jumper wires. <br> </p>
With this file you will be able to print Flash adapter with pogo test pins for WLED ESP32 Controller with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Flash adapter with pogo test pins for WLED ESP32 Controller.