Flex Phone Holder

prusaprinters

<p>I came up with an idea and couldn't sleep so I had to design it. :)</p> <p>Printed in PETG (≥30% infill) and flexible filament, for example TPU. Infill for flexible filament depends on how flexible the material is. Mounted either using M5 hex screw/nut or a 1/4-20 screw (camera/tripod thread). A bit flimsier then my other phone mount but less screws needed and more... flexible. ;)</p> <p>As always, if you find it useful a tiny donation goes a long way to show appreciation.</p> <p>Hardware needed (for stand):<br/> 1 pcs M5x15 hex head screw<br/> 1 pcs M5x20 hex head screw<br/> 2 pcs M5 nut<br/> 1 pcs M5 washer</p> <h3>Print instructions</h3><p>No support, print holder in PETG 15% (standard settings)</p> <p>Stand can be printed in PLA or PETG but the latter might feel too flexy.</p> <p>The grips are printen in TPU 0-15% infill.</p>