Floor Cable Cover

thingiverse

Running a cable across the floor is never a good solution but sometimes there is no alternative this is intended to at least reduce the trip hazard it creates. ### Dimensions - width : 40mm - length : 50mm, 170mm or 300mm - inner diameter for cable : 5mm For my use case this was intended for a 5mm ethernet cable however you can modify the fusion or step file included to get different sizes. It is a very simple model one sketch and one extrude. Also if you want to get a shorter length for some final section you can just stop the print early. ### Printing You can print it in vase mode to save on plastic it will still join up in the center and the cable it self will give it structural strength. I printed it vertically to allow for a smooth upper curve if you do the same make sure to use a generous brim width. ### Installation I have added some images of the installing process I recommend using some paper so the tape does not stick to the cable. This model is designed for a 15mm double sided tape I used [this one](https://www.aliexpress.com/item/32841762072.html?aff_platform=portals-tool&aff_fcid=82a73a3f7e6848519d72185fba77da4e-1627126648060-01833-_ePNSNV&aff_fsk=_ePNSNV&aff_trace_key=82a73a3f7e6848519d72185fba77da4e-1627126648060-01833-_ePNSNV). it is important that it is 1mm thick if your tape is different you will need to modify the file and adjust the dip accordingly.