Floppy Boi - Articulated Robot Toy

cults3d

Articulated robot cat, joints are print in place, no supports needed. The moving parts have a clearance of 0.5mm, which should be ok on most printers. I recommend printing at 0.12mm layer height or lower, as this is what I designed for. I tried printing at 0.2mm but found that some of the joints fused. I designed it to be small, but this also means some of the individual parts are quite small as well. My printer had no issues with this, though its something to keep in mind when you print. For example, over extrusion, stringing, etc can really mess with the print-in-place joints. All parts should snap together. A small spot of glue can help keep them in place - I used glue on foot pegs for example. Use the picture as reference for assembly. IMPORTANT!!! In the picture, the peg on the top of the arm is facing in the wrong direction. This should actually be rotated 90 degrees if you want it to articulate properly. STEP file has been included in case you cant wait for me to make changes, or if you just want to customize this.