Flsun Super Racer uToolhead

thingiverse

A very compact direct drive toolhead for Flsun SuperRacer Effector is made by Werebear93 (thing:5155922) <h2>Features:</h2> - very small, lightweight and powerfull - 2x 5015 blowers for part cooling - direct drive dual gear extruder based on BMG internals - easy to clean gears due to open design - the heatsink cooling fan is also used to cool the motor <h2>BOM:</h2> - (4x) M3x12mm screws (hotend fan) - (2x) M3x12mm screws (stepper motor) - (2x) M3x6mm screws (extruder mount) - (2x) M3x10mm screws (main body mount) - (8x) M3x4mm screws (part cooling fan ducts) - (1x) M3x20mm screw (lever arm tension) - (1x) Compression spring (OD: 5mm, L: 10mm, Wire diameter: 0.7mm) - (1x) M3 washer - (4x) M3 threaded inserts (ODxLength): - (2x) 4.6x5.7mm and (2x) 4.6x3mm or - (4x) 4.6x3mm <h2>Print</h2> - layer height 0.1mm - extruder material should be hight temp resistant because of motor heat. ABS, ABS+, ASA, PA - use supports for 5015 fan adapters