FLY-SHT36 Can Mount
prusaprinters
<p>This model is for mounting it directly at the back of a 36mm pancake motor. I have nowhere else to put it. I don't want it to be bulky and big so I designed my own. <br>I added a cable tie mount to remove the strain on the connector itself from tool head movement.<br><br>100% Infill is just under 5 grams. That's PLA. <br><br>Parts needed:<br>M3*15*5 Standoff (The one I used is from an FPV Drone frame)<br>M*10 or 15 Bolt (to hold the mount and canbus to the standoff.<br><br>--If using an NF sunrise or similar, you need a longer bolt that will protrude behind the mounting holes of the pancake motor because that is where you will screw the standoff.<br>-- Orientation is shown in one of the photos. Make sure you have good support settings.<br><br>PLASTIC SPACERS ARE RECOMMENDED between the bolt and the board.<br>PLASTIC SPACERS ARE RECOMMENDED between the bolt and the board.<br>PLASTIC SPACERS ARE RECOMMENDED between the bolt and the board.<br>PLASTIC SPACERS ARE RECOMMENDED between the bolt and the board.<br><br>Enjoy! </p>
With this file you will be able to print FLY-SHT36 Can Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on FLY-SHT36 Can Mount.