Flyer 1903 multicolor

prusaprinters

<p>This is a remix of Flyer 1903 by alienkim (<a href="https://www.thingiverse.com/thing:824995">https://www.thingiverse.com/thing:824995</a>).</p> <p>I simply split the model into four parts, so that the wings could be printed in white, the framework in brown, and the motor/chains/propellers in some sort of dark metal color.</p> <p>After you print the metal parts, you will need to sand and shave the axles and shave the insides of the bearings until they all fit together.</p> <p>See <a href="https://www.thingiverse.com/thing:824995">http://www.thingiverse.com/thing:824995</a> for the original source files.</p> <p>This remix is made with alienkim's permission.</p> <h3>Print instructions</h3><h3>Licence: Creative Commons - Attribution - Non-Commercial - No Derivatives Category: Vehicles Print Settings</h3> <p><strong>Printer:</strong> Prusa i3</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.1 mm</p> <p><strong>Infill:</strong> 15%</p> <p><strong>Notes:</strong></p> <p>You'll want to use a wide brim for the "wooden" parts.</p> <p>The wings will need supports and you need to be VERY careful when you slice and print, as they are loaded with overhangs that will want to curl up. I printed them at 20 mm/sec, 0.1mm layers. The main wings took about 33 hours to print.</p>