Flying Fish HSP 94123 RWD conversion kit

thingiverse

This is front steering block for HSP Flying Fish 94123. It replaces first diff. Models that have "_reinforcer" must be printed and glued with main part (printed with ABS, glued with acetone solute). steering_plank_center, stand_v5, and some others must be printed mirrowed too. Work still in progress, compatibility of old and updated parts is not guaranteed (some of the parts may not match, please leave a comment). To make it work you need some not printed parts: 1. 10mm(or 12mm) m3 stands: https://aliexpress.ru/item/5-10pcs-aluminum-spacer-m2-m2-5-m3-M4-M5-m6-round-Aluminum-Standoff-rods-For/1005001696477482.html 2. Thrust ball bearings 10x5x4mm: https://aliexpress.ru/item/10Pcs-F5-10M-F5-11M-F5-12M-High-Speed-Thrust-Ball-Bearing-Miniature-High-Accuracy-Flat/4000219380179.html 3. Some m3 screws and nuts. 4. 2x14mm (or 12mm) m2.5 screws (hidden head) and nuts. 1x20-25mm m2.5 and nut. If you to use alu frame (https://aliexpress.ru/item/RC-Model-Car-1-10-Aluminum-Alloy-Base-Plate-03001-03062-94103-94123-Chassis/1005001411019486.html), it already has mounting holes in the center to mount servo (with servo_corner.stl). When using plastic frame (https://aliexpress.ru/item/32754373092.html) - you have to drill holes yourself or use included servo_plate to mount servo without damaging the frame (5mm hidden head screws are required). Front shock tower you can get there: https://aliexpress.ru/item/1-PCS-HSP-102022-02035-Aluminum-Front-Shock-Tower-RC-Accessory-Part-1-10-Upgrade-Parts/4001059402765.html. Stock plastic will also work but it is not hard enouth. I have also included gearbox case. I've taken it from grabcad and optimized for 3D printing. It looks like allu from aliexpress.